Best Method For TP Link Wifi Extender Setup

Extenders like all networking devices have the basic function of improving the wireless network coverage in and around your home/office. However, they are efficient only as much as the way you set them up. Incorrect configuration may cause further trouble with the internet connectivity. If you have recently purchased a new TP-Link extender and are looking for information on how to set things up, this website will walk you through the steps to do it in no time. You will also learn ways to troubleshoot any issues that may arise.

Starting With The Setup Process

Though a majority of TP-Link extender models are plug and play types, there are some additional things you’ll need to take care of for TP link wifi extender setup. These include:

  • Ethernet cable(s),
  • Wireless extender,
  • Network name and SSID,
  • Default IP address and Gateway address,

If you are unsure as to where to find the SSID and password details, you can check the bottom of the tp-link extender for a label mentioning the same. Once you have the details, and all the things you need, here are some steps you can follow to set things up:

  • Plug your TP-Link extender to a power outlet near your wireless extender device.
  • Power it on and wait for a few seconds so the power LED and more can go solid.
  • Note: If you are using a smartphone or a tablet, go to the Wireless Settings section and look for the TP-Link extender network in the available networks name. If you are using a laptop or desktop, you can connect it to the extender using an ethernet cable. Once the device/ computer is connected to the extender network, you can access the login page easily.
  • It should automatically take you to tplinkrepeater.net portal for configuration or you can open the browser manually and type the tp link extender IP address http://192.168.0.254 or http://tplinkrepeater.net and hit enter.
  • The setup page will pop up and you’ll need to type in the default username & password for tp link extender. Please type “admin” in the username and password section. and click on the Login button.
See also  Applications of machine vision in industrial robotics

Configuring The Network Settings Of TP-Link Extender

  • As the next step, you can select your region and press the “Next” button. The extender will search for the available networks in the periphery around. Select the name of the one that corresponds to the main router.
  • On the next screen, choose the security type as WPA2-PSK and define a new SSID to the network. You can customize the network name and password as per your preference.
  • If you are using a dual band extender, make sure you configure the second band network as well. Review the settings and click on the Finish button.
  • The extender will reboot once you have saved the settings. After a minute, unplug the extender and plug it somewhere between the location where you have kept your router and where you are sitting.
  • You’ll now see solid LEDs on the extender meaning the setup process is now successful. Use the password to connect with your new extender network.

After following the above steps from the link tplinkextender.net, your extender will get a reboot and you will be successful in accessing the internet.

Common Issue With TP Link Extender

Issues with your TP-Link extender can arise both during the setup and post the setup. Important is to know the ways you can fix things up and make your device running efficiently. Here are some problems which you might encounter:

  • Boot issues with TP-Link extender
  • Unable to access the TP-Link Extender Setup or Login page
  • Forgotten Admin and Network Passwords
  • Outdated Extender Firmware

If issues with your TP-Link extender are consistent and not going away, you can always reset the same. This will erase the configuration and you may need to follow the TP Link Extender setup process again. Here are some steps you can follow:

  • Locate the RESET button on the side panel of the extender device.
  • Press and hold the same for about 6-7 seconds. The LEDs on the front panel will flash.
  • Release the RESET button and wait for the extender to boot up again.
  • Once the extender restarts, you can follow the tp-link extender setup process to reconfigure your device settings and make it operational.
See also  Basic Hacks to Use of Brother Printer Installer

Extend The Wifi Signal Coverage Around Every Corner Of Your Space

Ensuring seamless connectivity in and around your home is essential if you are looking to get chores done. However, issues with the extender may deviate you from achieving this feat. This troubleshooting guide will list common issues that users face the most and will try to suggest troubleshooting methods to eliminate them as well.

Thanks to Admin to share my Post here

Leave a Reply

Your email address will not be published. Required fields are marked *