Procedural Steps to Configure Canon Pixma MG2520

Setup-Canon-Pixma-MG2520

Desired Steps To Setup Canon Pixma MG2520 Printer Manually

Here is the step-by-step guide listed you simply has to follow them till the end to effortlessly setup your Canon Pixma Mg2520 All-in-one printer. Give a look at below points:

Setup Canon Pixma MG2520 Printer Manually For Windows

If you are a windows user and have purchased the PIXMA MG2520 printer, then don’t look here and there. Simply, take a glance at given lines and perform the same accordingly:

As early as the printer will be plugged-in to the operating system, the window will be active sooner and thus will start installing the machine for further use

  • Do not turn your Canon Pixma Mg2520 printer ON until the system being stated
  • When you unbox the printer, you will get to see the USB cable that has come along with the package
  • What you should actually do is to plug the right-end of the USB cable to the USB port on your printer and then plug the remaining end of the USB cable to the free USB port to the PC
  • After successfully plugged-in the USB cable, turn your printer ON by pressing the power button on your machine
  • After that, you are advisable to do the desktop and then tap the “Start” button
  • By doing this, Control Panel window will be opened. So, on this page, you have to hit the “Device and
  • Printers” option and then click on “Add a printer” option
  • After that move ahead to the local printer option
  • And then search and hit the port where your printer is connected to the PC
  • In the upcoming step the Canon option will pop-up on Windows screen. You have to select it and then choose your printer model. Once you select the right printer from the list, click “Next” button
  • Click “Next” button again
  • And then tap “Finish” to keep your selected printer option as a default
  • The printer setup process gets done; your printer is ready to print now. Enjoy!

Setup Canon Pixma MG2520 Printer Manually For Mac

For Mac users, skip the above written steps and focus on the underneath points as the following guides will be impactful for you. Let’s start the Canon Pixma MG2520 Printer Setup process:

  • First and foremost, users are required to check the top-right corner of the website and locate the “Support & Drivers” section from there
  • Next, you have to go to the list of the product manner and there look at for “consumer and home office” option. Hit on it once you found
  • After that, go the list of the product family and then select the “Printers” option
  • Click on the “Drivers and software” option next to the Canon Pixma MG2520
  • After doing that, a drop-down menu will be seen. By clicking on it you have to choose the version of Mac OS that you are using
  • And then start downloading the printer driver on Mac
  • Once download completes, give a double-click on the downloaded file to run it
  • Select the “Continue” button twice and then press “Install” to add the printer on your Mac device
  • Then follow the on-screen prompts appropriately to install the driver
  • At the end, use USB cable to connect your printer with Mac device
  • Now, your printer is all set to deliver the printouts. Enjoy!
See also  10 migliori visualizzatori di storie di Instagram

Why is my canon mx922 not responding – Causes and how to fix

There can be multiple reasons for your Canon mx922 printer not responding. But the most common reason behind this issue is the lack of communication between the printer and your computer. Until the issue is resolved properly the Canon printer won’t print. It is also possible that you are using some outdated printer driver. This can easily be resolved by just updating all the drivers. You always need to keep your software and drivers updated to avoid such problems. So now you are facing this issue then we should discuss Canon mx922 troubleshooting.

How do I fix if my Canon mx922 printer not responding?

To find the perfect solution for the given problem you need to find why it occurs. If you can find that then you will get the exact solution of the Canon mx922 printer not responding.

Usually, this issue occurs due to two reasons:

  • Outdated Drivers.
  • Poor connection between PC and printer.

For the first situation, you need to check for all the drivers, and if any update available then update them as soon as possible.

For the second you need to follow a procedure to perform Canon mx922 printer troubleshooting.

  • Tap the setup button on the touch panel of your canon printer.
  • Navigate to the LAN setup window; now click on OK and then “Easy install” after that confirm preference.
  • Now click on Access Point Name and enter the wi-fi password, and hit OK.
  • Now load the setup disc into the computer, go to easy install. Choose your printer name and click next.
  • Now wait for 2-3 minutes and make a print job, also ensure to attach the USB cable correctly into the Canon printer.
  • Also, the network is working properly and the printer is not in sleep mode. Now ON your printer and check Canon printer mx922 troubleshooting problem is resolved.
See also  Monoprice 110010: The Best Gaming Headset You Can Buy

How do I factory restore my canon mx922 printer?

It is simple to factory restore your Canon device; you just need to keep track of the indicators that are already given on canon. Sometimes the Canon printer won’t print properly then you have to factory restored it your device or use Canon printer troubleshooting techniques.

Factory restore: From the menu, you can factory restore all the settings of your printer.

  • Turn ON your printer and go to the menu
  • Then go to device setting and click on OK
  • Now select the factory restore process and hit OK

INK Cartridge Factory Restore: The best thing is that when you insert the cartridge, the canon printer will guide you through. It will help in aligning the cartridges.

  • Turn OFF your printer
  • Hit power and start button simultaneously and after some time-release Stop button.
  • Now again hold the power button and hit start twice.
  • The printer will show “O” on the screen after 30 seconds.
  • Now hit stop button four times before hitting the Power button twice
  • Now switch off the printer by tapping the power button.
  • Release the USB and power cable factory restore the cartridges.
  • While hitting the Power button and connecting the power cables again along with the power button is pressed open the cartridge door.
  • Close the cartridge door, and leave the Power button.

Now this best Canon mx922 troubleshooting, it can resolve most of the printer issues.

Is the Canon mx922 a wireless printer?

Yes, it is a wireless printer that can be connected using  wifi. The wireless feature offers a seamless workflow.

See also  Wireless Display (Wi-Di) Market Estimating Revenue Show big Move in 2022

How do I get my canon mx922 printer back online?

Sometimes while you are trying to print some papers you will see that your printer goes offline automatically. Now, this causes Canon printer won’t print issues and it’s very common to occur.

  1. Check all the plugs and ensure they are connected properly.
  2. Ensure that PC and printer both are connected to the same network.
  3. Check for the signal strength between the printer and wireless router.
  4. Ensure that you are connected to the correct printer.

Try using these Canon printer troubleshooting methods to fix the issue.

How do I make my Canon mx922 printer wireless?

The canon printer is a wireless printer you just need to connect it with your Wifi. To connect your printer to wifi you need to follow some simple steps that we mentioned below.

Why won’t Canon Printer mx922 connect to WiFi?

  1. Go to Menu of the printer and then go to the device settings
  2. Now select LAN settings and then OK
  3. Select the changes wired/wireless
  4. Now search for WPS configuration
  5. You need to select the push button
  6. When the access point is completed click on OK

Use this Canon mx922 troubleshooting method to set up wifi easily.

Where do you put paper in a Canon printer mx922?

The paper is loaded in the paper tray which is kept at the lower part of the printer. Just pull out the tray and put all the papers. Insert the tray and that’s it

Follow the Other Top Post on this Website

Leave a Reply

Your email address will not be published. Required fields are marked *